RamAir95TA

http://www.cityrunners.com/1/rickjoe2.mpg

I am in the near lane. Far lane was a 383 LT1 with mildly ported heads and a hotcam. He was having traction issues.

I have a few bad valve seals (blue smoke) and my trans is shifting into 3rd at 4k, hence the low trap speed. I'm replacing the valve seals and taking a look at the tranny tables to figure out what's going on. That's an XE236/242 on stock heads. Best time thus far is a 12.52 @ 107.25.

Enjoy.

missingmyz28

excellent run man, thanks for the vid. Congrats!

BTW, I'm sure you've said before, but I was just wondering what other mods you have on your car (the minor stuff).

Again, congrats on the run!

RamAir95TA

Thanks.

Mods are Crane valvetrain, 1.6 rockers, Comp R lifters, guideplates, XE 236/242, untouched stock heads, CSI electric water pump, Cloyes double roller, 3.42 gears, JH long tubes and y-pipe, ET streets, Holley 52mm TB, and all the small/free stuff. PCMforless programming also.

Pretty much all the bolt-ons. Bone stock suspension. I'm trying to track down video of the 1.66 60'...

Haskin Z28

im impressed, ive been watching your car and i read a lot of your posts (im silver lt1 z28, i have those pro stars still if u still want em ) but i still am most impressed with your mild bolt on car trapping 108.5, stock stall and all

xxsaint69x

383 with hot cam and mild heads running 13.4 @ 108 lol wtf
I would say he has a lot more issues then traction lol.

As for your car...it ETs alright, but trap speed is pretty damn low. Hopefully once u work out all the problems, the trap will go up A LOT.

Marcin