how do i hook it all up..the connector is difffernt (2 wires, camaro), (6 i think for the trans am, and also a vacume line?) I dont know......If anyone done it, please let me know.
Thanks
Marcin

 

i would like to know also.....i love the lumbar support in the TA seats. and if someone could tell me hoew to hook them up in a camaro i would buy some.

 

Are you doing both seats with lumbar supports?

The orange and the black are all you need to power the driver seat.

The passenger side gets everything from the driver's side. You have to extend the orange plus the white, gray and gray/black to the passenger seat. You also must extend the air line to the passenger seat.

 

Yeah, They should just hook right up unless you didn't get the rails too. Like said before the passenger side gets everything from the drivers side.

 

Rather than making a new post i wanted to do a search on this. I'm gonna be installing TA seats in my car and i was wondering where do i hook the vaccum line from? I assume you just color match and extend the wires over to the pass side. Thanks Claude

 

On the 2 seats, there is a black air connector, that is where the air line goes between.
it's a special line that snaps into the connectors on the seats.
drivers seat has 2 white connectors, one main for power and one that runs to the pass seat.

 

it looks the seats have special fittings for the air lines. What does it take to hook up the air line to the fittings on the seats? I know you hook up the air line to the seats but where do you hook up the air line to on the other side? People mention you hook it up to vaccum. Do you just hook it up to the intake manifold?

 

No, the pump is in the drivers seat and sends the air to the pass seat via that air tube.