LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Testing 02 Sensors???

Thread Tools
 
Search this Thread
 
Old Jul 20, 2005 | 12:18 PM
  #1  
Camaro4LifeSS's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 175
From: Hazel Green,Alabama,U.S.A
Testing 02 Sensors???

I finally got my car back together after swapping in the GM847 cam and replacing the blown up rearend,but now I have a little problem.I think it may be one of the 02 sensors but I wanted to be sure before I buy them.When I first start it ,it runs great.After a little bit of driving it starts running kinda rough and choppy.But it's fine at wide open throttle.I scanned the codes and I had a 02 sensor code and I cleared it.Still have the same symptoms but the code has not came back yet.
Whats your thoughts on it fellas?
Thanks,
JE
Old Jul 20, 2005 | 12:34 PM
  #2  
matt65's Avatar
Registered User
 
Joined: Jan 2005
Posts: 491
From: Lincoln, AL
Re: Testing 02 Sensors???

Honestly if it were me and the sensor was as old as mine are I would just replace them. I still have the stock sensors @ near 101k Miles. I have seen my room mate test his O2 Sensors resistance with the Fluke Multi. But thats on a '84 VW Campervan . It may be possible to do the same with our cars.

--Great to see guys from AL on here--
Old Jul 20, 2005 | 12:57 PM
  #3  
Camaro4LifeSS's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 175
From: Hazel Green,Alabama,U.S.A
Re: Testing 02 Sensors???

Thanks for the reply.
Rolllll Tide Baby
Old Jul 20, 2005 | 01:10 PM
  #4  
matt65's Avatar
Registered User
 
Joined: Jan 2005
Posts: 491
From: Lincoln, AL
Re: Testing 02 Sensors???

Rolllll Tide Baby
LOL !

" she started screaming 'Roll Tide!' and he (Mike Price) was yelling back, 'It's rolling, baby, it's rolling."
--www.espn.com--

WAR EAGLE!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Injuneer
LT1 Based Engine Tech
5
Dec 15, 2014 09:36 AM
naaz90
Site Help and Suggestions
3
Jul 27, 2002 08:22 AM




All times are GMT -5. The time now is 03:29 AM.