T-56 Rebuild UPDATE
Thread Starter
Registered User
Joined: Feb 2001
Posts: 852
From: Las Vegas, NV, USA
T-56 Rebuild UPDATE
Per my previous thread a few of you asked to keep updated.
Previous Thread
I am NOT going with the kit from D&D Performance. I found a place that has more parts and costs about $70.00 less, with the same parts as the D&D kit. I found out today that my mainshaft is done, as is my front cluster. Funny because my tranny didn't sing to me at all
I kinda don't think its bad. But I will let him open it up some more and see what else it is
Hanlon 610-469-2695 I spoke with Linda
169.95 - Synchros, New Pads, Seals, and a screw rice sticker jk
Donato Engineering
150.00 - Bearing and Race Kit
55.00 - Steel 3-4 Shift Fork
I am not sure if I am going to need a new slider or 3rd Gear, But those are roughly 150-160 each from Donato Engineering too.
Previous Thread
I am NOT going with the kit from D&D Performance. I found a place that has more parts and costs about $70.00 less, with the same parts as the D&D kit. I found out today that my mainshaft is done, as is my front cluster. Funny because my tranny didn't sing to me at all
I kinda don't think its bad. But I will let him open it up some more and see what else it isHanlon 610-469-2695 I spoke with Linda
169.95 - Synchros, New Pads, Seals, and a screw rice sticker jk
Donato Engineering
150.00 - Bearing and Race Kit
55.00 - Steel 3-4 Shift Fork
I am not sure if I am going to need a new slider or 3rd Gear, But those are roughly 150-160 each from Donato Engineering too.
Last edited by SVT Killer LV; Feb 5, 2003 at 08:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post