what's up OK here is the problem i put my trans in today everything look ok untile i went and pushed the clutch in and it would not do anything so i pushed a little harder and it when down all the way and didnt return well i jacked the car up and took off the slave and there was a lot of play in the fork i dont know if i put it in backwards or what i can wiggle the fork around a lot PLEAE HELP!!!!

 

Make sure its in all the way!, I don't think you can put it in backwards...

 

I would make sure u pushed it in all the way, it should kinda snap into place.

 

yeah it sounds like you didnt snap the fork back onto the throwout bearing. It sometimes takes a little finess.

 

Thanx I will try that iam not really sure what i did but i will check