yeah i forgot the intake gaskets so i went ahead and put it down on the motor for a pic

and all i gotta do is set the lash on the RR's and i will be a lil closer to finish






bottom end consist of eagle 4340 lightweight 3.75 strokecrank
eagle h-beam 6.0 SRP flat top 2 valve forged piston.... speedpro low tension rings clevite 77 H series zero decked

top end is all from steve quinn's old motor setup including his prototype LTx intake he ran before the single plane..

 

I'm a big fan of your car . I saw that vid on LS1Tech. and just blew me away 11.06 n/a tell me how did you do it?

 

lots of research and trying things out

prob a raceweight of 3300, decent track prep, bad *** tune, and combo

everything just has to work together

 

Something on the front is missing-- probably gonna cause an oil leaking issues.

If ya got the heads and cam and compression that Steve had it will haul ***.

Very nice.

 

she's gonna have a static of 11.8 right now and when this season ( just a few months left ) i will tear it out again and put some dome pistons in it and a splayed main cap setup and see what happens from there