Bought these off a board member, just wanting to know what I bought

 

From the basic shape my guess is Comp Magnum rockers. Is there a Comp ID between the roller tip and the area where the pivot ball resides?

 

I am not at home right now, out of town due to work. My GF called me and told me my package came, so I told her to take a pic of one of them.
I will call her and see if she sees any writing on them,
thanks for the reply

 

dont mistake "magnum" for pro-magnum

the regular mag had the regular lock nut on it. the pro-mags have a trunion bearing and it's a roller with a poly lock nut.

 

By looking at the pic, can you tell me if they are SA or NSA?

 

I hope you paid well under $100 for those.

 

not quite, found them new on jegs for 191.99 a few minutes ago.
Well speed, what can you tell me about these RR? SA or NSA, if you can.

 

They are absolutely worthless for me and if I cant get my money back, seems they will be a nice ornament in the attic

 

They are NSA. And you can get a good set of full roller rockers for $150 used all day. Did whoever you bought them from tell you what kind of rockers they are?

 

1.6 crane SA 3/8th stud
Thanks speed that is the info I was looking for, same thing another person said as well.

 

for another 50 bucks get pro=mags.

i paid i think 245 for mine shipped. somewhere around there. i bought them at autozone. SA 1.6 RR

you'd be better off with "gold race" class over thos stamped rockers. they're nice rollers but for a few bucks you can have the light weight aluminum and a full trunion roller.

 

I think I sold my 1k mile full roller self aligning proforms for like 90 bucks.

 

I recently bought Comp #1418-16 and fit 1987-97 w/centerbolt valve covers,are 1.6 ratio,3/8 stud and are self aligning.On pg.153 dec Summit catalog is where you find them and they are 191.95 and btw i found myset brand new on Ebay.This might be what you have.

 

Yeah canuck them are the sames ones. Not sure what I am going to do at this point. Thanks for the replies.