Recommended break in period for 4.10 gears?
Recommended break in period for 4.10 gears?
ok guys, i'm going with a Motive 4.10 gear and full install/rebuild kit. for the break in period i've been told to use regular (non-synthetic) 75w90 gear oil, and drive by slowly accelerating/decelerating on a 10 mile trip, then let cool off, repeat, and that's it.
My questions...
1) do i need to use the GM limited slip additive during the break in period, or only after i switch to synthetic oil after 500 miles?
2) how many miles total do i need to drive before they are broken in? a local guy here who owns a shop and has done hundreds of mustangs and many f-bodies and says after the first two short trips, it's ready to go. I've heard 150 miles and 500 miles from other sources...so which is correct?
Thanks very much guys!
My questions...
1) do i need to use the GM limited slip additive during the break in period, or only after i switch to synthetic oil after 500 miles?
2) how many miles total do i need to drive before they are broken in? a local guy here who owns a shop and has done hundreds of mustangs and many f-bodies and says after the first two short trips, it's ready to go. I've heard 150 miles and 500 miles from other sources...so which is correct?
Thanks very much guys!
I did the heat cycle thing and was easy on it for 500 miles and then I tried my best to break it.
They been in for about 40k now and I just took my TA girdle off cause the gasket needed changing and the gears look great, even wear, no metal shavings.
They been in for about 40k now and I just took my TA girdle off cause the gasket needed changing and the gears look great, even wear, no metal shavings.
Im about to get mine installed, so do I use synthetic for the break in period? And is it necessary to change the fluid after 500 miless??? I was just going to put synthetic with the additive in it right off the bat and leave it there.
Originally posted by All4Chevy
Im about to get mine installed, so do I use synthetic for the break in period? And is it necessary to change the fluid after 500 miless??? I was just going to put synthetic with the additive in it right off the bat and leave it there.
Im about to get mine installed, so do I use synthetic for the break in period? And is it necessary to change the fluid after 500 miless??? I was just going to put synthetic with the additive in it right off the bat and leave it there.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM



