rebuilt a lt-1 what parts
Thread Starter
Registered User
Joined: Dec 2001
Posts: 16
From: dalton,ga,usa
rebuilt a lt-1 what parts
i'm looking for a good cam i hard that comp cam has a good one but o don't know any part nimbers. i have ram air on a 95 z28 with headers ,flowmasters,msd,programer,built auto trany. i want it to be fast but i want it to be a good daily driver and still give some new cobras a run i mmed a lot of stuff lika T.B. and a otipi spark i want to use stock size pistons but i want to replace the stock ons so i can run some N O S
Banned
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
Re: rebuilt a lt-1 what parts
Originally posted by bspdyz
i'm looking for a good cam i hard that comp cam has a good one but o don't know any part nimbers. i have ram air on a 95 z28 with headers ,flowmasters,msd,programer,built auto trany. i want it to be fast but i want it to be a good daily driver and still give some new cobras a run i mmed a lot of stuff lika T.B. and a otipi spark i want to use stock size pistons but i want to replace the stock ons so i can run some N O S
i'm looking for a good cam i hard that comp cam has a good one but o don't know any part nimbers. i have ram air on a 95 z28 with headers ,flowmasters,msd,programer,built auto trany. i want it to be fast but i want it to be a good daily driver and still give some new cobras a run i mmed a lot of stuff lika T.B. and a otipi spark i want to use stock size pistons but i want to replace the stock ons so i can run some N O S
was there somethign about a sheep in there
Registered User
Joined: Oct 2001
Posts: 238
From: texas
Re: rebuilt a lt-1 what parts
Originally posted by bspdyz
i'm looking for a good cam i hard that comp cam has a good one but o don't know any part nimbers. i have ram air on a 95 z28 with headers ,flowmasters,msd,programer,built auto trany. i want it to be fast but i want it to be a good daily driver and still give some new cobras a run i mmed a lot of stuff lika T.B. and a otipi spark i want to use stock size pistons but i want to replace the stock ons so i can run some N O S
i'm looking for a good cam i hard that comp cam has a good one but o don't know any part nimbers. i have ram air on a 95 z28 with headers ,flowmasters,msd,programer,built auto trany. i want it to be fast but i want it to be a good daily driver and still give some new cobras a run i mmed a lot of stuff lika T.B. and a otipi spark i want to use stock size pistons but i want to replace the stock ons so i can run some N O S
Banned
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
Re: Re: rebuilt a lt-1 what parts
Originally posted by mr diabolical
you can get a cam like the cc305 or a LT4 hot cam for a good cam that has good manner on the street. and stock pistons will handle up to about a 125-150hp shot of nitrous.
you can get a cam like the cc305 or a LT4 hot cam for a good cam that has good manner on the street. and stock pistons will handle up to about a 125-150hp shot of nitrous.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Sergio
LT1 Based Engine Tech
11
Jan 27, 2016 04:27 PM
