Question on O2 Sensor's
Thread Starter
Registered User
Joined: May 2002
Posts: 124
From: Heber City, Utah, USA
Question on O2 Sensor's
I am in the process of installing my AS&M Headers, ( They Finally Showed Up). I need to know does the 93 Z have 2 or 3 O2 Sensors? Also where can I buy new ones? I have looked at Thunder Racing and Summit, but I'm not shore which ones fit my car. Any Info would be greatly appreciated. Thanks in advance for all who reply!
Thanks
Tuff.
Thanks
Tuff.
Thread Starter
Registered User
Joined: May 2002
Posts: 124
From: Heber City, Utah, USA
Originally posted by got_hp?
goto advance or discount auto, or autozone, or napa.
get ac delco O2's..........do NOT get the bosch.
my local place has ac delcos for ~$38 each.
goto advance or discount auto, or autozone, or napa.
get ac delco O2's..........do NOT get the bosch.
my local place has ac delcos for ~$38 each.
Tuff.
Registered User
Joined: Jun 1999
Posts: 939
From: Lowcountry
There are two O2 sensors before the cat. Also keep in mind that the '93 f-bodies used single wire, non-heated O2 sensors. They should be cheaper 
If you ever decide to run longtubes though upgrading to heated O2 sensors isn't a bad idea.
If you ever decide to run longtubes though upgrading to heated O2 sensors isn't a bad idea.
Thread Starter
Registered User
Joined: May 2002
Posts: 124
From: Heber City, Utah, USA
Originally posted by Buttercup
There are two O2 sensors before the cat. Also keep in mind that the '93 f-bodies used single wire, non-heated O2 sensors. They should be cheaper If you ever decide to run longtubes though upgrading to heated O2 sensors isn't a bad idea.
There are two O2 sensors before the cat. Also keep in mind that the '93 f-bodies used single wire, non-heated O2 sensors. They should be cheaper
If you ever decide to run longtubes though upgrading to heated O2 sensors isn't a bad idea.
Tuff.
Registered User
Joined: Mar 2003
Posts: 869
From: Houston, TX
I'm putting LT's on my 95...actually a 97 LT1 going into my 95 engine bay...so do I just use both O2 sensor places that are on the LT's and that's it? Sorry for bursting in, but I've been wondering.
JOHN
JOHN
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Originally posted by pennys58
I'm putting LT's on my 95...actually a 97 LT1 going into my 95 engine bay...so do I just use both O2 sensor places that are on the LT's and that's it? Sorry for bursting in, but I've been wondering.
JOHN
I'm putting LT's on my 95...actually a 97 LT1 going into my 95 engine bay...so do I just use both O2 sensor places that are on the LT's and that's it? Sorry for bursting in, but I've been wondering.
JOHN
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Originally posted by FacelessZ
Where are these people?
Where are these people?
Dal Slabaugh: 877-448-5451
email: lockitup@bright.net
VanDevere Buick/Pontiac/Olds Akron, OH
Jason Cromer: 877-726-8295 or 850-243-8826 (direct parts dept ph #)
email: gmparts@samtaylor.com
Sam Taylor Buick/Cadillac Ft. Walton Beach, FL
