Ported LT4 Heads from Pace
#1
Ported LT4 Heads from Pace
Flow numbers are as Follow's...
***12363287ET CNC Ported LT-4***
Valve Dia.: 2.000" 1.550"
Lift Intake Exhaust
0.100 70.6 46.9
0.200 134.1 96.8
0.300 192.0 132.2
0.400 237.6 165.5
0.500 268.5 184.6
0.550 273.8 189.8
0.600 277.5 195.3
Is anyone running these heads? I'm seriously considering them.
Here's a link to them....
http://www.paceparts.com/product.asp?0=0&1=0&3=160416
***12363287ET CNC Ported LT-4***
Valve Dia.: 2.000" 1.550"
Lift Intake Exhaust
0.100 70.6 46.9
0.200 134.1 96.8
0.300 192.0 132.2
0.400 237.6 165.5
0.500 268.5 184.6
0.550 273.8 189.8
0.600 277.5 195.3
Is anyone running these heads? I'm seriously considering them.
Here's a link to them....
http://www.paceparts.com/product.asp?0=0&1=0&3=160416
#6
wtf?
you can get stock castings to out flow that. Flow isn't the end all but those are some downright embarassing numbers for comparitive purposed.
I promised seth i wouldn't post my flow numbers, but i can tell you right now LT1 castings outflow those on both intake, exhaust and it looks like midrange.
you can get stock castings to out flow that. Flow isn't the end all but those are some downright embarassing numbers for comparitive purposed.
I promised seth i wouldn't post my flow numbers, but i can tell you right now LT1 castings outflow those on both intake, exhaust and it looks like midrange.
#7
Originally posted by White_94_TA
We noticed that.
Price not withstanding... I'd pay it.
We noticed that.
Price not withstanding... I'd pay it.
you can get bare LT4 heads for under $1k..........then get a MUCH better port job for less money, with larger valves.
trey, keep in mind those flow numbers are using stock valves, are yours larger?
also, its a CNC port job.......not a hand port.........CNC is for consistency, not to be the best hands down.
#9
Originally posted by got_hp?
youre insane
you can get bare LT4 heads for under $1k..........then get a MUCH better port job for less money, with larger valves.
trey, keep in mind those flow numbers are using stock valves, are yours larger?
also, its a CNC port job.......not a hand port.........CNC is for consistency, not to be the best hands down.
youre insane
you can get bare LT4 heads for under $1k..........then get a MUCH better port job for less money, with larger valves.
trey, keep in mind those flow numbers are using stock valves, are yours larger?
also, its a CNC port job.......not a hand port.........CNC is for consistency, not to be the best hands down.
#10
Originally posted by got_hp?
youre insane.
youre insane.
As much as i love the LT4 Heads.. I don't know if i'm willing to pay 1100 Dollars for the Ported Ones.
Last edited by White_94_TA; 07-08-2003 at 03:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
oldschool
Parts For Sale
16
02-09-2016 09:21 PM
95chwagon
Parts For Sale
4
01-13-2015 09:19 PM
Wilson
Car Audio and Electronics
0
07-21-2002 05:08 PM