plug wire,, pic inside
Thread Starter
Registered User
Joined: Apr 2004
Posts: 1,046
From: Fargo, ND
plug wire,, pic inside, is it right?
i was taking a closer look at how my wires were ran, and ran across this1 it looks like there are metal shavings, dunno. but it looks like this wire is touching metal! #7
pic link is in post #3
please tell me what u think. dont want to mess with yet if it looks like everyone else's! and does anyone know where i can look at some pictures of lt1's after l/t install, that have pictures of how the wires were routed?
thanks in advance
pic link is in post #3
please tell me what u think. dont want to mess with yet if it looks like everyone else's! and does anyone know where i can look at some pictures of lt1's after l/t install, that have pictures of how the wires were routed?
thanks in advance
Last edited by camzaro28; Dec 13, 2004 at 06:01 PM.
Thread Starter
Registered User
Joined: Apr 2004
Posts: 1,046
From: Fargo, ND
Re: plug wire,, pic inside
Here ya go this one should work http://us.f2.yahoofs.com/bc/41bcda2a...z9ivBBjIIlwBqb
in this pic, to the right of the plug boot, ther is a bolt in the block right there. and there is what looks like to be a heat shield. well my wire is ran between the shield and the block! and when it goes by that bolt it look slike metal shavings! u can see 2 of them in the pic!
in this pic, to the right of the plug boot, ther is a bolt in the block right there. and there is what looks like to be a heat shield. well my wire is ran between the shield and the block! and when it goes by that bolt it look slike metal shavings! u can see 2 of them in the pic!
Last edited by camzaro28; Dec 13, 2004 at 06:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Dan_the_ManZ28
LT1 Based Engine Tech
7
Feb 21, 2015 02:01 PM