PLEASE HELP big problem with car
#1
Registered User
Thread Starter
Join Date: May 2002
Location: Fort Worth, Tx, United States
Posts: 333
PLEASE HELP big problem with car
I Just got it back from PCMFORLESS again and well i am runnin it and well at the beginning it is horrible,m i figure it needs to get used to the PCM well it dies a few times, then after a while it runs great.... well i go to test it it dies again then it starts up and i drive it hard then it dies again liek the cam goes freakin crazy... Now i did have abent push rod a few weeks ago but we fixed that problem with new pushrods. Then ever since like it runs GREAT then dies. well then my battery wouldnt work, and i would get no power, like the neg connection wasnt connecting so i would have no power. Do you think like it just doesnt get connection when it dies... like it bounces around hard core (rpms) then dies, like it want to live... any ideas?
throwin two codes
1) bank one sensor 1- to high voltage (it is runnin at about 900mV which is rich) yet my A/f ratio is like 14.7-15.2
2) is just bank 2 sensor 1 - same hting....
Please any ideas?
I have a ATAP scan i will email any who wants to look at it, i dotn know ow far it went because it kept dyin but i will get it ready to eamil by tommarow night, so let me know if u want to look at it, it would help me a lot thanks.
throwin two codes
1) bank one sensor 1- to high voltage (it is runnin at about 900mV which is rich) yet my A/f ratio is like 14.7-15.2
2) is just bank 2 sensor 1 - same hting....
Please any ideas?
I have a ATAP scan i will email any who wants to look at it, i dotn know ow far it went because it kept dyin but i will get it ready to eamil by tommarow night, so let me know if u want to look at it, it would help me a lot thanks.
Thread
Thread Starter
Forum
Replies
Last Post
ChrisFrez
CamaroZ28.Com Podcast
0
11-30-2014 08:41 AM