PAC Beehives on LT1

Reply Subscribe

Thread Tools

Search this Thread

Mar 24, 2008 | 06:16 PM

#16

dangalla

Registered User

Joined: Jun 2006

Posts: 2,092

From: lakeville, pa

i think these are the right pushrods, but you should measure them

http://store.summitracing.com/partde...0&autoview=sku

Mar 24, 2008 | 06:19 PM

#17

dangalla

Registered User

Joined: Jun 2006

Posts: 2,092

From: lakeville, pa

Quote:

Originally Posted by 19z28camaro02

Thanks, you're definately one of the most knowledgeable on the boards here.

hardly, everything i know i learned here

but good luck with it and make sure you return the favor by helping someone else here one day

Mar 24, 2008 | 08:43 PM

#18

19z28camaro02

Thread Starter

Registered User

Joined: Oct 2004

Posts: 833

From: La Porte, IN

I will, knowledge should be free.

Mar 24, 2008 | 08:51 PM

#19

19z28camaro02

Thread Starter

Registered User

Joined: Oct 2004

Posts: 833

From: La Porte, IN

I just realized that you have LE2 heads, I have stock. This all gunna work right?

Mar 25, 2008 | 07:40 AM

#20

dangalla

Registered User

Joined: Jun 2006

Posts: 2,092

From: lakeville, pa

Quote:

Originally Posted by 19z28camaro02

I just realized that you have LE2 heads, I have stock. This all gunna work right?

yes they will work, i have no idea how to set up installed height though and you are gonna need to figure that out because it is very important

Mar 25, 2008 | 08:02 AM

#21

19z28camaro02

Thread Starter

Registered User

Joined: Oct 2004

Posts: 833

From: La Porte, IN

schwing

Mar 25, 2008 | 10:27 AM

#22

94zgreenmachine

Registered User

Joined: Feb 2004

Posts: 1,309

From: Oshkosh, Wisconsin

Quote:

Originally Posted by dangalla

yes they will work, i have no idea how to set up installed height though and you are gonna need to figure that out because it is very important

Pac 1218 springs at 1.750 (145 lbs on seat and 350 lbs open, good for 600-.610 lift)

Mar 25, 2008 | 03:38 PM

#23

19z28camaro02

Thread Starter

Registered User

Joined: Oct 2004

Posts: 833

From: La Porte, IN

Mucho Gracias!

Mar 25, 2008 | 09:45 PM

#24

marshall93z

Registered User

Joined: Feb 2003

Posts: 2,639

From: Mooresville, NC

Quote:

Originally Posted by 94zgreenmachine

Pac 1218 springs at 1.750 (145 lbs on seat and 350 lbs open, good for 600-.610 lift)

I think mine were 140/340. Could have been differences in scales.

Mar 26, 2008 | 02:29 AM

#25

94zgreenmachine

Registered User

Joined: Feb 2004

Posts: 1,309

From: Oshkosh, Wisconsin

Quote:

Originally Posted by marshall93z

I think mine were 140/340. Could have been differences in scales.

Was yours at 1.80 installed. That was how Lloyd use to set them at but now goes with 1.75

Mar 26, 2008 | 11:21 AM

#26

marshall93z

Registered User

Joined: Feb 2003

Posts: 2,639

From: Mooresville, NC

1.75

Mar 26, 2008 | 12:01 PM

#27

9formula4

Registered User

Joined: Mar 2006

Posts: 269

From: Iowa

wait! dont the heads need machine work to work on the LT1 heads?? I am pretty sure I read that somewhere. They are not a direct fit spring.

Mar 26, 2008 | 12:04 PM

#28

dangalla

Registered User

Joined: Jun 2006

Posts: 2,092

From: lakeville, pa

Quote:

Originally Posted by 9formula4

wait! dont the heads need machine work to work on the LT1 heads?? I am pretty sure I read that somewhere. They are not a direct fit spring.

they fit just fine

Aug 27, 2008 | 02:26 AM

#29

94adamz28

Registered User

Joined: Jul 2008

Posts: 57

Quote:

Originally Posted by ChevalierSS

4705-16 locators
795-16 retainers
614-16 locks

all Comp Cam part numbers

Just bought pac 1218 valve springs, will these parts work with my pac springs also, thanks.

Aug 27, 2008 | 02:37 AM

#30

DelSoto

Registered User

Joined: Sep 2000

Posts: 574

From: Stillwater Ok USA

Quote:

Originally Posted by 94adamz28

Just bought pac 1218 valve springs, will these parts work with my pac springs also, thanks.

PAC 1218 are beehive springs and yes those parts will work.

Reply Share

First
Prev
2 / 3
Next
Last