Open headers sound clip of my Joe Overton cam!!
#1
Open headers sound clip of my Joe Overton cam!!
Here is a sound clip of my car that I took while the ypipe was off of the car. I think you can either click on the link below or it might work better to right click and save as... The file size is 1 meg.
http://www.freehomepages.com/andyg/b...aders_high.wav
BTW, the car is NOT dynoed yet, nor do I have track times. I got the car running not too long ago, and we are still working on the tuning.
Happy listening
Brian
http://www.freehomepages.com/andyg/b...aders_high.wav
BTW, the car is NOT dynoed yet, nor do I have track times. I got the car running not too long ago, and we are still working on the tuning.
Happy listening
Brian
#3
That sounds mean as hell !!!!!! When you get the tuning done will it lope that much? WOW just hearing that clip makes me wish I already had headers done so I could jump right on to cam install congrats man
#9
Actually, the car is somewhat tuned. It has the program from my XE 236/242 in it. We just have to do the WOT fueling and then do some more fine tuning on the idle stuff. Acctually the car runs great going through the closed exhaust on the street. The cam is alittle touchy, but what do you expect wtih a cam like this.
I am sure some of you can tell that this is not a small cam by the way it sounds.
A big thanks to Joe for the cam, and I am getting anxious for some track times and the dyno numbers whenever we get the thing tuned.
A friend of mine on the board is doing the tuning, actually he is local to me. Dan K is his name.
Brian
I am sure some of you can tell that this is not a small cam by the way it sounds.
A big thanks to Joe for the cam, and I am getting anxious for some track times and the dyno numbers whenever we get the thing tuned.
A friend of mine on the board is doing the tuning, actually he is local to me. Dan K is his name.
Brian
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
oldschool
Parts For Sale
16
02-09-2016 09:21 PM