O2 Sensors
#1
O2 Sensors
We just overhauled the engine in 95 Z. Many engine mods , cranked up and now both O2 sensors read shorted . Any ideas on what happened ? Keep blowing fuse for coolings fans and traced back to O2s . Did crank up with race fuel could that have killed sensors that quick ? Have not driven car yet. Any help will be greatly appreciated. Thanks in advance
#2
Re: O2 Sensors
Leaded Racing Fuel (even VP C16 with 6.0gr Lead/gal) will not "short out" O2 sensors, it will cause slow response in them over time. I'd bet you have the + wire for O2 heat shorted/pinched somewhere. The blowing of the cooling fan fuse suggests a dead short to ground somewhere. Did you re-wire in new O2's wrong ? Race fuel could not cause a short in the O2's, and DEFINITELY could not cause a short to the FANS ! Look for chafed, cut, or pinched wires. I'd bet somethinfg got pinched during the install of the engine.
Thread
Thread Starter
Forum
Replies
Last Post
350350
Fuel and Ignition
14
08-11-2015 12:03 PM
whitehooptie
Computer Diagnostics and Tuning
3
08-10-2015 07:02 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
08-07-2015 01:26 PM