Well I just got my car up and running after a CC305 cam swap and I left the valve covers off so I can adjust the valves, anyways the cars started right up (and sounds badass) and I started adjusting the rockers and that is when I noticed that I don't have oil coming out of any of them. I just installed a new oil pump, and the pressure is about 20psi at a hot idle. I have ProForm 1.6RRs and I got these lifters off of ebay http://cgi.ebay.com/ebaymotors/ws/eB...category=33614

I let the car idle for a little bit and even increased the revs, and still no oil coming out of the pushrods. The car has GTX 10w40 in it right now, any help or ideas would be great. Thanks guys