http://www.msdignition.com/2005/2005_9.htm

Has anyone tried this new Opti out yet? If so, what were your results from 6500-7200 rpm?

Thanks in advance for all replies

 

Last thing I heard was they wasn't going to make one for the lt1, I wondor how good this one is, and if its that much "better" than a stock GM one. Maybe we will get some post on this thread to see. How much are theres anway?

 

I am wondering about the same things Coolformula. No price is posted on the MSD site. I'll probably give em a call later today just for a price.

Not sure how long this Opti has been out. Hope to get some more replies from someone that has one.

 

It's only a cap and rotor, not the whole opti. You still have to use your optical sensor. Not trying to be an *** but, if you'll do a search you'll see this has been discussed 4-5 times this month.

 

Thanks for the heads up 30696bird, but I ran a number of searches using MSD Optispark seperate and togethor as key words. Came up with nothing.

If you can point me in the right direction on some threads about this Opti..... that would be Great!

By the way, you're not being an ***

 

check the part number on msd site then look it up at summit but type msd infront of the part number
they are going to be shippping on the 7th of dec
150 bucks

 

Here are a couple........... http://web.camaross.com/forums/showt...light=msd+opti , http://web.camaross.com/forums/showt...light=msd+opti , If you scroll all the way up on this screen it's almost right in the middle of the screen, you'll see a tab that says search, click on it, type MSD opti that's what I did. Good luck!

 

Thanks Man.

Glad I did not get my hopes up too high. Looks like I'm still going the Bob Bailey/Deltec route. I heard the Dynaspark is also prone to the same problems as the stock opti at high rpms.

That's where I need an ignition safety net.

Gentlemen, Please let me know if I am missing any other alternatives to the Opti in order to spin to 7200 rpm