I just picked up some Konig Monsoons without lugs. Where can I get some that will fit these wheels? Also, where can I get a set of locking lugs for them? (17x9.5)

Thanks!

 

McGard makes a wide range of designs, size and finishes of lugnuts and locks. They are top quality from my experience, as I've owed several sets on various cars over the years. I have a set of black chrome ones that replaced my wimpy oem lugs and cheap black plastic covers. I regrettably lost the link to the McGard website that helkps you identify the ones for your application.

 

Mine came with Gorrilas.

 

your local Discount Tire store...I bought the lugs for mine there for $30 for the whole set of 20....you don't need a different locking lug nut on each wheel because the nuts the they sell all have to be installed/removed with a special adapter, works just like locking lug nuts....HTH.....

 

That brand is fine for the budget minded, but have you compared those to the quality of the McGards? McGards are expensive but look so much nicer IMHO.

 

I used these same rims on my previous car some years back.. you need some narrow lugs that will slide into the hole and let you slip your wrench in there too... right? This may seem stupid but if you mail ordered your rims have you unpacked all of them? Reason I ask is because I unpacked one and saw it would not fit called around found someone local with a good selection of lugs bought the ones I needed for near $50 went home and the last tire/rim I unpacked had the lugs taped to the inside of the box. So.. IF you still haven't found your lugs I've got some that would work

If you want them let me know and I'll go see if I can find them in the garage somewheres.

 

I bought them used so I know there aren't any lugs...

You have mail Will...