Hi there,

Today I've finished my Jet Hot Long Tubes install (what a PITA! ) and ran across this wire.

Click here for the picture

This was taken form underneath the car. The wire loom comes down from the PCM and includes wires for 4 sensors: a single wire for the knock sensor, a bigger gauge wire for the starter, 4 wires that go to the O2 connector and one mysterious wire, black w/ white stripe, that I can't identify! The wire is cut down and taped up. Some McGuyver type fella must have deleted something, I know I wasn't touching that wire... BTW, I'm not getting any codes. So what's this wire for?!

Please help me identify this thing, thanks in advance!

 

http://shbox.com/1/1995_Z28_engine_harness_A4.jpg

According to THIS, it's a block ground wire

Should go... HERE
http://shbox.com/1/g103.jpg


(courtesy shoebox's page)

 

That black wire on my car is just connected to the block. Looks like its just a ground wire of some type.

 

Spinner, Robbie, THANK YOU guys! I'm happy it's just a ground wire, I thought the previous owner has hacked something into this car

Thanks for the pictures again!

 

You're welcome.