1995 Chevy Camaro z28.
Exterior: Black
Interior: Black Leather
All Stock

Here are my future plans for my baby.

Air Box:
http://store.summitracing.com/partde...5&autoview=sku

Strut Tower Braces:
http://store.summitracing.com/partde...5&autoview=sku

Cold Air Intake:
http://www.pitstopautoparts.com/cata...and-n&s=1&my=1

Body Kit:
http://www.pitstopautoparts.com/cata...xenon&s=1&my=1

Grille:
Can someone find me a nice grille, but not to cheap looking

Hood Protector:
http://www.pitstopautoparts.com/cata...y=1&make_code=


Exhaust System with Daul Catalytic Converter:
http://www.pitstopautoparts.com/cata...y=1&make_code=

Sway Bar:
http://www.jegs.com/webapp/wcs/store...tegoryId=11177

Valve covers:
Can't find a valve cover with a z28 logo on them. someone plz help.

And of course a new paint job.

Those are my plans please help me if they fit or are not compatible. if not please let me know what it is. htx

here is my baby.

 

No need for the airbox for an LT1 when you buy the CAI farther down the list that will be all you need...strut tower braces have been a questionable upgrade for the 4th gens, come people swear by them others think they are worthless. for now your money would be better spent elsewhere IMO. The exhaust is nice, but pricey quality ones can be had cheaper if you are concerned with price. I think bras look tacky and say I'm trying to cover something up. The body kit is a personal choice, but would look likeass with a bra IMO. I've not seen valve covers like you want.

 

UPDATED

Custom Hood
http://www.e-bodyparts.com/miva/merc...roduct_Count=1

Cold Air Intake:
http://www.pitstopautoparts.com/cata...and-n&s=1&my=1

Body Kit:
http://www.pitstopautoparts.com/cata...xenon&s=1&my=1

Grille:
Can someone find me a nice grille, but not to cheap looking

Hood Protector:
http://www.pitstopautoparts.com/cata...y=1&make_code=


Exhaust System with Daul Catalytic Converter:
http://www.pitstopautoparts.com/cata...y=1&make_code=

Sway Bar:
http://www.jegs.com/webapp/wcs/store...tegoryId=11177

Valve covers:
Can't find a valve cover with a chevy logo on them. someone plz help.

And of course a new paint job.

Those are my plans please help me if they fit or are not compatible. if not please let me know what it is. thx

 

you're not going to find VC's with any logos on them unless you get morroso's center to outter conversion. it's only like 75 bucks and allows you to use any perimeter bolt SBC kit...and it's a 1/2" spacer too...yay. allows you to run high rise rockers.

also, check up on VFNfiberglass.com for some awesome hoods...they have a 3" cowl that i think will do you good...i dont like add-ons.

check here for body kits too http://www.grounddynamics.com/merchant/mainpage.htm ...it's pretty new and it's not an add-on kit either. replaces the front and rear fenders completely with new ones...that dont look bad at all. i'm planning on going with the one that's blue.

 

i also dont like the ones in blue. to me its to exagerated.
im thinking about the Chevrolet Camaro Sniper Body Kit.