MSD Has TWO WireSets for the LT1???
Registered User
Joined: Feb 2003
Posts: 78
From: Monroe, MI
Go to each of the pages and click on the technical section on the bottom. The second one has to be cut to fit and boots and terminals installed. The first one is already to install. The second one would be good for doing OVC for headers.
Jason
Jason
Registered User
Joined: Aug 2001
Posts: 644
From: Orange County, CA
I recently purchased the 32129, which is the universal wires. Used for OVC.
One end already has the LT1 opti spark crimped on and the other end is open, but it comes with 90 degree boots and terminals ready to be crimped on.
Hope this helps.
Jody J.
One end already has the LT1 opti spark crimped on and the other end is open, but it comes with 90 degree boots and terminals ready to be crimped on.
Hope this helps.
Jody J.
Thread Starter
Banned
Joined: May 2002
Posts: 1,475
Originally posted by JodyJ
I recently purchased the 32129, which is the universal wires. Used for OVC.
One end already has the LT1 opti spark crimped on and the other end is open, but it comes with 90 degree boots and terminals ready to be crimped on.
Hope this helps.
Jody J.
I recently purchased the 32129, which is the universal wires. Used for OVC.
One end already has the LT1 opti spark crimped on and the other end is open, but it comes with 90 degree boots and terminals ready to be crimped on.
Hope this helps.
Jody J.
BEAUTIFUL
thats what i was thinking and hoping for thanks
Last edited by InjectedSS; Mar 27, 2003 at 01:40 AM.
Thread
Thread Starter
Forum
Replies
Last Post
