MSD Digital 6 Ignition

Reply Subscribe

Thread Tools

Search this Thread

Jun 3, 2004 | 10:59 AM

Deenasty

Thread Starter

Registered User

Joined: Jan 2004

Posts: 1,322

From: San Francisco

MSD Digital 6 Ignition

Is anyone running the MSD Digital 6 ignition? I am getting mine today, and had a few questions as far as the rev limiters..I heard you can use one for launch control? How does that work?

Jun 3, 2004 | 12:51 PM

ibanez6rg

Registered User

Joined: May 2002

Posts: 4,579

From: Cincinnati, OH

I am running one, it is right here.

Jul 12, 2004 | 10:12 PM

z28importkilla

Registered User

Joined: Sep 2003

Posts: 84

From: West Greenwich, RI

how hard is it to hook up the digital 6? I plan on getting a zex dry kit and wanted something where i can retard my timing.

Jul 12, 2004 | 11:34 PM

ibanez6rg

Registered User

Joined: May 2002

Posts: 4,579

From: Cincinnati, OH

Quote:

Originally posted by z28importkilla
how hard is it to hook up the digital 6? I plan on getting a zex dry kit and wanted something where i can retard my timing.

It's really simple.

Jul 13, 2004 | 01:39 AM

DrewHMS97SS

Registered User

Joined: Sep 2003

Posts: 1,917

From: Las Vegas

want ultra simple? get the harness from msd, and all you have to do is run 4 wires to the coil, power and ground.....done

Jul 13, 2004 | 08:22 AM

Red96Lt1

Registered User

Joined: Jun 2003

Posts: 2,253

From: Birmingham, Al

Those really only help if you are running power adders.

Jul 13, 2004 | 10:24 AM

juiced_lt1

Registered User

Joined: Dec 2003

Posts: 128

I'm running it. It works great and is easy to hook up. Good for n2o. Theres a two stage rev limit, so you can theoretically use it for launch control, but I've never done it.

Jul 13, 2004 | 10:30 AM

DrewHMS97SS

Registered User

Joined: Sep 2003

Posts: 1,917

From: Las Vegas

im not sure how stopping your spark would help you launch

Jul 13, 2004 | 10:39 AM

juiced_lt1

Registered User

Joined: Dec 2003

Posts: 128

the only thing I could think of would be keeping it a constant rpm before you drop the clutch, and then immediately switching it off. Keep tire boiling to a minimum?

Jul 13, 2004 | 11:13 AM

#10

YZF/LS1 Freak

Registered User

Joined: Sep 2001

Posts: 720

From: Indianapolis

If you are going to go N20 I would go Nitrous Express or TNT or something Zex is geared more for the imports.

Jul 13, 2004 | 11:23 AM

#11

juiced_lt1

Registered User

Joined: Dec 2003

Posts: 128

The solenoids for the Zex kit are only good up to 180-185hp. If you plan on going higher, then don't get the zex. I run zex, but i'm only sprayin 150.