Which LT's have the best ground clearance?
Registered User
Joined: Sep 2001
Posts: 175
From: Massachusetts
Re: Which LT's have the best ground clearance?
I have KooK's on my vert, it's lowered about 1-1/2" and I have plenty of room... 4" maybe.
After all my research on the net I chose KooK's due to the lack of slip-fit primaries and excellent ground clearance. You are not going to find much better clearance with any other header manufacturer that uses 3" or larger collectors. Do yourself a favor, buy the KooK's... "do it once, and do it right".
*side note*
QTP might be making full length headers for LT1 F-body's, and they plan on competeing in the KooK's market of "top-o-the line headers". If you are in no rush, it might be worth your while to wait and see what they have to offer... at the very least they might end up driving down the price of the KooK's.
My .02
Shea
After all my research on the net I chose KooK's due to the lack of slip-fit primaries and excellent ground clearance. You are not going to find much better clearance with any other header manufacturer that uses 3" or larger collectors. Do yourself a favor, buy the KooK's... "do it once, and do it right".
*side note*
QTP might be making full length headers for LT1 F-body's, and they plan on competeing in the KooK's market of "top-o-the line headers". If you are in no rush, it might be worth your while to wait and see what they have to offer... at the very least they might end up driving down the price of the KooK's.
My .02
Shea
Last edited by Houdini; Mar 2, 2006 at 11:38 PM.
Registered User
Joined: Sep 2001
Posts: 175
From: Massachusetts
Re: Which LT's have the best ground clearance?
Originally Posted by Quickss96
were are in agreement on the same topic again just differnt site. Listen to him he knows what he is talking about and i agree with him 100%. 
You ever get that feeling your being followed......
Just like me huh, bouncing between two sites!
Registered User
Joined: Sep 2003
Posts: 5,907
From: The Wild West
Re: Which LT's have the best ground clearance?
TPIS has some of the best, they were actually designed to fit on a lowered F-body. I know Dynatech wasnt bad either. Although I have Hookers and I have never scrapped the headers just bolts on my band clamps for the ORY.
-Dustin-
-Dustin-
Thread
Thread Starter
Forum
Replies
Last Post
autoxr166
General 1967-2002 F-Body Tech
0
Sep 25, 2015 04:21 PM