Ready to take the plunge... and this is my list. Anything I'm missing?

(http://www.supersportperformance.com/jethotheaders.htm) Jet Hot Long Tubes - $540 free ship
(LS1Speed) Hooker 3" Y-Pipe - $170
(LS1Speed) Felpro Collector Gaskets Pair - $8
(LS1Speed) Stage 8 Head Bolts - $30
(LS1Speed) Copper Head Gaskets - $37
(LS1Speed) O2 Extenders - $36
(PCMForLess) PCM Program - $100+15ship
Total - $936 + LS1Speed Shipping

BTW, do I need 12" or 24" O2 extensions? Thanks

 

Just correcting what I assume are typos. Those should read header. It looks like you pretty well have it covered unless you haven't replaced your plug wires recently. Now would be a good time to do so if you haven't. 12" extensions should be all that you need.

 

Yeah, should say header, but I put head so I wouldnt confuse them with collector gaskets. Got 4,000 mile taylor pro wires, not worried about them anytime soon. 12"s will do it then, thanks

 

I was just making sure, because head and header gaskets are two completely different items. The same goes for head and header bolts. Make sure you order by saying header and/or have the part numbers off of their site.

 

Go with the 24" O2 extensions...that way you can route them away as far as possible from the headers. Do yourself a favor and pick up some heat reflective tape to wrap portions of your plug wires for protection from header burns.