Low Oil Light after replacement of unit.
Thread Starter
Registered User
Joined: Jul 2002
Posts: 131
From: Las Vegas, NV, US
Low Oil Light after replacement of unit.
Hey guys, I replaced my Low Oil sensor with a brand spankin new one from GM and everytime I start my car it has the Low Oil light on. If I wait a little and shut the car off and turn it back on, the light goes away.
Recently my oil pan was in an accident (ran over a rock) and damaged the oil pan, bell housing, tranny, k-member. Everything has been replaced.
Do you guys have any thoughts on what I should check? Thanks in advance.
Dan
Recently my oil pan was in an accident (ran over a rock) and damaged the oil pan, bell housing, tranny, k-member. Everything has been replaced.
Do you guys have any thoughts on what I should check? Thanks in advance.
Dan
Thread Starter
Registered User
Joined: Jul 2002
Posts: 131
From: Las Vegas, NV, US
Originally posted by Kreinmc
Maybe the sensor that goes to the side of the pan? or the sending unit or you just have low oil.
Maybe the sensor that goes to the side of the pan? or the sending unit or you just have low oil.
Dan
Thread
Thread Starter
Forum
Replies
Last Post
squarehead
General 1967-2002 F-Body Tech
7
Jan 15, 2015 07:02 PM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
isimplyexist
Car Audio and Electronics
2
Mar 25, 2004 08:06 PM