So I don't think I'll have enough money to get the blower this year so I'm thinking about just putting everything in without the blower and getting that next year. I'm wondering what kind of power I should expect.

Forged 383 around 8.5-9.0 comp ratio
Heads that flow in the 330's
Blower cam
Duration
Intake:224.5
Exhaust:231.1

Lift
Intake:5578
Exhaust:.56422

LSA 114.1
Full exhaust
Single plain vic jr with 4150 tb

This will be going through a built 4L60E with a 2800 stall and a strange 12 bolt with 3.73 gears.

Just wondering what kind of hp/tq numbers to expect with the low compression?

 

Maybe I am behind on times, but 330 seems quite high for any LT1 head.

My guess is around 450, but my guessing is not to good haha.

 

360-370rwhp? idk

 

Its not a LT1 casting, and I think 450 with only around 9.0:1 would be pushing it. I'd be nice if it does, but I seriously doubt it. I guess we'll see though when time comes to put this motor together.

 

Even with nice heads and the longer stroke, a 224/231 cam isn't going to put 450 to the wheels with low compression.
Expect to be in around 390-410 @ 5700rpm

What kind of boost + intercooler setup were you planning on running on top of that?

 

Large 4" core FMIC with a F1A. Possibly meth if needed.

 

What heads do you have that flow 330?

if you would have a bigger stick it would do more na but as quoted, a 224/231 isnt to big. With 18psi it will do great but I wouldnt expect 400rwhp give or take a few na. Cant wait to see the FI numbers.