.100 - 66.5 - 53.8
.200 - 135.3 - 104.5
.300 - 191.9 - 147.9
.400 - 237.8 - 170.7
.500 - 261.9 - 181.8
.550 - 269.6 - 184.2
.600 - 273.9 - 186.0
.650 - 273.5 - 186.4
.700 - 268.8 - 187.7


Update: There's the full sheet. These are beautiful.

 

Pretty nice. Cam selection next?

 

Sounds good. Good luck tuning. And better track times

 

Already have one of those. Bumpety-Bump

 

Do you mind if I ask you want those ran you, and what parts you used? Thanks.

 

Lets just say more then $1000 and less then $1500 and lloyd went out of his way to get them done, at no extra cost to me. Major props to him for doing what he did.

Max effort port
Oversize Ferrea 6000 valves, 2.00/1.56

Also got the intake done to match

 

Nice! Same thing I did with the heads and intake, went with the new Comp Beehives & LE2 cam... should be here in a couple of weeks.

 

#s look nice! what flowbench does Lloyd use??

 

Super Flow 600 I belive

 

 

Nice numbers. Does anyone know what the intake runner CCs are on these heads and what the valve sizes are?

 

I believe the runners get up to around 195cc and the valves are typically 2.00/1.56 for those flow #'s.

 

Looks pretty decent. Do you have enough lift to take advantage of the higher lift flow numbers?

 

Oh yes, it's big.

 

Obviously a secret too, no?