Joe Overton LT1 cam 4 sale!!!!
06-10-2006, 07:01 PM
#1
Registered User
Thread Starter
Join Date: Oct 2005
Location: ATX
Posts: 6
Joe Overton LT1 cam 4 sale!!!!
I would put this in the classifeds but that is mostly LS1 stuff. Sorry guys I went to the darkside. A sweet deal came up on a 2003 Cobra and I could not pass it up. I have always wanted one but they have been out of my reach. I sold my Z in less then 2 minutes to the first person I offered it to. But I did not sale my prized LT1 possesion. I have a new, never installed JOE OVERTON {OWNS AND BUILT THE FASTEST NA LT1 IN THE WORLD} cam. It is a
296/310 duration
234/242 {at .50}
.532/.510 lift
109 lobe sep.
This is the same cam in Gary Lawson's 97 vert TA. His car with H/C put down 452/398 and ran 11.7/120 in a 3800 pound car.
http://www.homestead.com/my97ws6/
check it out!!
I paid 300 for the cam and would like 250.obo plus shipping.
296/310 duration
234/242 {at .50}
.532/.510 lift
109 lobe sep.
This is the same cam in Gary Lawson's 97 vert TA. His car with H/C put down 452/398 and ran 11.7/120 in a 3800 pound car.
http://www.homestead.com/my97ws6/
check it out!!
I paid 300 for the cam and would like 250.obo plus shipping.
06-10-2006, 08:35 PM
#3
Registered User
Join Date: Apr 2000
Posts: 1,444
Re: Joe Overton LT1 cam 4 sale!!!!
06-10-2006, 10:20 PM
#4
Registered User
Join Date: Aug 2000
Location: Oklahoma City, OK
Posts: 586
Re: Joe Overton LT1 cam 4 sale!!!!
Originally Posted by Clean94Z
296/310 duration
234/242 {at .50}
.532/.510 lift
109 lobe sep.
This is the same cam in Gary Lawson's 97 vert TA. His car with H/C put down 452/398 and ran 11.7/120 in a 3800 pound car.
http://www.homestead.com/my97ws6/
check it out!!
I paid 300 for the cam and would like 250.obo plus shipping.
234/242 {at .50}
.532/.510 lift
109 lobe sep.
This is the same cam in Gary Lawson's 97 vert TA. His car with H/C put down 452/398 and ran 11.7/120 in a 3800 pound car.
http://www.homestead.com/my97ws6/
check it out!!
I paid 300 for the cam and would like 250.obo plus shipping.
I'm sure Gary (and Joe) are lovin' you posting their cam specs 
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
02-09-2016 09:21 PM