I have the front end off my TA since I pulled the motor & tranny to install the 383. I'm working on locating the ATI 2 core intercooler & the B&M Supercooler (about 8.5x11) somewhere in the airflow. Looks like there is not a lot of room up there. Has anyone done this? Looking for any advice.

 

Still working on the intercooler, probably won't get it mounted until the motor is in. Here is where I'm putting the oil cooler. The drawback is that it won't be flush with the condenser for low speed pull through from the fans, but for the time being, this is what looks best. I've yet to make a top bracket for it. I mounted it to the lower core support. The cooler is a B&M Supercooler.