I've been to every hardware store and performance store in town and I cant find the right size bolt for capping off the AIR hole on my new headers
Anybody know where I can find some or anybody want to ship me some !
Matt

 

Based on information from other posts on this subject, you need a 22mm drain plug available through Napa, Part Number 704-1048. I think you typically have to have it ordererd. Hope this helps.

 

M22 oil drain plug worked for me, I'm thinking they were about 5 bucks each at napa and about one dollar at pepboys.

 

Do you just ask for a "m22 drain plug"
I looked that part number up on napa's website and nothing came up.
Thanks In Advance!!!
Matt

 

M22 is the thread.... M22 x 2.5 for coarse and M22 x 1.5 for fine.

Metric stuff can be hard to find but that's what your looking for... a bolt, cap, whatever with an M22 thread. You should be able to distinguish the coarse from fine with your peepers.

-Mindgame