How would these heads/cam react to a 383??
Thread Starter
Registered User
Joined: Oct 1999
Posts: 1,490
From: Tampa Florida
How would these heads/cam react to a 383??
One of our members is selling his 383 short block. I was going to go 355 but Im considering buying his short block instead.
My heads are Lloyd elliot street ported heads 2.02/1.6 SI valves.
Mid lifts were good. I forget but they were good.
.550 255cfms
.600 258cfms
Cam is a XE230/236 112 LSA.
How much power will my car see and how will the car feel with that xe230/236 cam?
Didnt have teh car dynoed.. and didnt run it at the track but i ran 2 of my friends.
Jugding by there track times.. 109 and 111 I'd say mine was around 113-114 with these heads/cam.
And how many miles should a properly assembled 383 last?
My heads are Lloyd elliot street ported heads 2.02/1.6 SI valves.
Mid lifts were good. I forget but they were good.
.550 255cfms
.600 258cfms
Cam is a XE230/236 112 LSA.
How much power will my car see and how will the car feel with that xe230/236 cam?
Didnt have teh car dynoed.. and didnt run it at the track but i ran 2 of my friends.
Jugding by there track times.. 109 and 111 I'd say mine was around 113-114 with these heads/cam.
And how many miles should a properly assembled 383 last?
Thread
Thread Starter
Forum
Replies
Last Post
