I am just curious how much horsepower I might have after I am done with my install. Some of my friends want an "estimate" or a ballpark to what the engine to do and I don't really have a clue. Mods are listed at this site.

http://kak.com/camaro/mycar.htm

 

alot?

 

Are you still using the stock valves?

 

id say you have somewhere between 1rwhp and 4000rwhp...seriously, u will never know unless u dyno it because the guesses people can give u may b close, but i guarantee it wont b exact. i know i know that was rather mean of me, but it is true. good luck man. go dyno that bad-boy and tell us how it does.

 

More than your making now. Its all in the tune man, it'll make you or break you. But you should make good power.

 

I have a PCMforLess tune, what do ya think??

 

Yes I am using stock valves but let the flow numbers talk

 

With good tuning I'll say 345-355 at the wheels.

 

You should be around 330 to 340 rwhp. With Long tubes that would jump to about 375 to 390 depending on your tuning.

 

I AGREE with Brad. i'm thinking about 350 rwhp with tuning..

 

with a decent port and polish you could pull 380 rwhp like other guys have done with that cam.

 

My port and polish is great... I hope you are right

 

360hp

 

I would say with a good tune your car could be close to 375 rwhp. I was looking at some old posts and a few guys have said they have between 360 and 380 depending upon the flow #'s on the heads and LT's or shorties.

 

Whats an easy way to add about 25 rwhp to my car? I have done everything I can think of to the top end except for an electric waterpump.