Just got back from the muffler shop. The guy did an awesome job on my 2.5in true duals (h-pipe). I ordered 4 - 45 degree bends, 2 bullet mufflers, was givin 2 chrome turndowns and new 3in to 2.5in collectors with aluminum gaskets. Took all that up to the shop today and had it welded up. After the guy gets done i get to looking and see that i can use my old driveshaft safety brace that goes across the exhaust. This made a great brace to hold the true duals. With a small rubber tube rolled in between the true duals and brace its snug and makes no rattles. The lowest point on my exhaust now is my header collector flanges Only charged me $70 to weld and install all the pipes.

I made a few videos of the true duals coming toward the camera full throttle, and in car full throttle. I also snapped a pic with the camera sitting on the ground of under the car to see the ground clearance. If anyone can host these small vids let me know and i'll email them to you. A guy named "Suparich" on this forum hosted the ones i have in my sig. I forgot his email though. Thanks.


Here are 2 pics of the duals

http://community.webshots.com/image5...1TjxpqY_ph.jpg

http://community.webshots.com/image5...1YJOWVa_ph.jpg

 

you can host your own at www.geocities.com you might have to make it a .zip file though pretty simple stuff...


--Tim

 

I checked it out but all i seen was for a webpage builder. I dont want to build a website and i dont wanna pay a monthly fee just for maybe 5-10 vids a year. I got pics at webshots for free though. Just need a video host.

 

They got a free website builder, its the same way I helped to host some other vids for a guy who had cam soundclips...

http://www.geocities.com/tx_5000/z28_hosting.html



just email it (them) to me and I'll put it on my site

 

Ok i'll check that out. I sent 2 mpegs btw. Thanks

 

Click here then click the link on the page for Videos for CZ28


There ya go...



Hey, by the way, how do you guys upload videos to your PC's? I have camcorder but don't know how to do it??

 

you will need the fire wire cable and the software. best buy sells a package software and cable for 79 bucks. does your camcorder have a video out of some sort.

 

yeah I got video/audio outlets, like you can hook up to the red/yellow/white..

 

no thats for your vcr so if you wanted to put if on vhs. what kind of camcorder. if its a sony there is probably a firewire cable oulet next to the outlet that you hook the wire to, to get the pics off the camera. it will be about a 1/16 of a inch tall and probably a 1/4 inch long.

 

its kinda old, its a Sharp ViewCam model VL-E685U