well my water pump is on its way out and im taking this opportunity to step up to an electric one. i think im gonna go with meziere. anyone have one? were you happy with it? also, is it a direct bolt/plug in or does it involve cutting or splicing wires?thanks in advance.

 

Mezziere (sp?) and CSR are about the same.

 

I have CSR for around 7 years now...still works, must be made by ford

 

haha thats a funny joke mdacton

so where did you your csr pumps from? summit just as mezziere and there own sh1tty summit brand.

 

I got my mezier hd pump off ebay.

 

CSR here, got from Summit.

 

I got my CSR from sdpc200.com a couple of years ago and havent had any problems. You just have to shave out a couple of notches in the water pump housing.

 

I have a Meziere pump for 2 years and have had no issues with it.My car is a daily driver and I 've put about 20,000 miles on it.

 

I have a Meziere and I also got the Painless wiring kit with a relay both from Summit...With the Meziere you have to slightly clearance the fan shroud and the wiring kit was very easy...

--Alan

 

Hey any idea on a part # for that painless kit?

another question, has anybody wired an audible alarm into the wiring in case the fuse pops for some reason?

 

I don't remember the number, but its just a standard EWP wiring kit...It was $25...

--Alan

 

What is wrong with the summit brand?
I was able to pick one up for $75 off the clearance rack because one of the mounting holes was nicked up. I have about 3500 miles on it so far and I haven't had any problems with it. Plus, it seems to be cooling it just fine.

 

can get a csr from herronperformance.com....sponsor on this site

 

I have had the Meizere on my car for a couple of years now. Also got the painless wiring harness. No problems. I got it mainly for the horsepower. However it does keep the engine cooler in summer traffic with the air on. Does not overheat at all. Another big plus.

 

alright so im gonna get:

http://store.summitracing.com/partde...5&autoview=sku

and im just wondering,that little wire thing next to the pump, is that the wiring kit you guys are reffering to? or do i need anyhing else to go along with it.