I know this isn't techincally a tech question but hopefully someone here will know the answer...I've got 3 gauges i need to mount somewhere in my car. I really wanted to mount them on the pillar but there in lies the problem, I can't seem to find a company that has a 3 pod pillar replacement and the single ones that you can mount look tacky...anyone have any suggestions on where to look or who might make a 3-pod pillar?

 

I believe supposedly that you have to have a 97+ or a ls1(98+) to get the triple pod to work. I've heard some say you can modify it to work on the lt-1's, but everyone else i know says it wont. So sorry

But check it out at: www.ls1speed.com
They have the triple one.

 

does anyone sell replacement apillar's with a dual pod?

thanks
Jesse

 

that's what i'm looking for but i want the 3 gauge set up...Autometer has the dual pod but they discontinued the triple.

 

If you are really creative, you can build your own. I used an AutoMeter 2-gauge pod, epoxied it to the stock A-pillar, filled the edges with bondo, and refinished it with the correct vinyl paint so it looks like a "factory" A-pillar. There's no reason you couldn't do the same thing with a double and a single.

2-gauge pod