what kinda gaskets am i going to need to do the hot cam install?

im thinkin just the timing chain cover?
anybody got part #s??

Thanks
Chris

PS Jason Cromer is backordered on the Hot Cam kit

 

TTT

 

Valve cover gasket, timing cover gasket and water pump gasket..you can get all of them from Autozone. Sorry to hear about Jason - he's the cheapest around.

 

thanks,
i ended up getting it from GMPartsdirect.com, i prob should have done it that way anyway since i would have had to pay the tax, cause i live in FL
wasnt sure about the valve cover gaskets, either, for some reason i thought they were self sealing(for some reason??)

i see you have about the same mods im going to have soon.
have you been to the track, what are your times

my mods:
ram air
MSD
TB Bypass
the new Jet Hot long tubes
no cats
LT4 Hotcam
with 1.6 RRs and LT4 Springs
LT4 Knock module
LCAs +PHR
Aluminum Drive Shaft 1LE
Flowmaster Cat Back
i also have the C% rims with Nitto 555s
but mines an M6
thanks
Chris

 

Timing cover gasket GM 10128293. $2.19 from Jason, probably about $3.50-$4.00 from your local gouging dealer.
Water pump gaskets: GM 10128343
3 seals: Optispark seal - GM12552428, Crank seal - GM 10128316, Water pump drive seal - GM 10217886
Intake gaskets (don't have the PN)

You can use the valve cover gaskets again.

 

Wow I forgot about the intake manifold gasket!! Be sure to get BLACK rtv silicone becuase you don't want to have the infamous 'intake manifold' leak.

Goin' to the dyno tommorrow if they can fit me in. Going to the track next week. Good luck on the install.