Finally , ordering a Cam
Thread Starter
Registered User
Joined: Dec 2003
Posts: 2,315
From: NY...what a bad place for a nice car
Re: Finally , ordering a Cam
Originally Posted by Cmr0z28
I don't know how much the exact total was...I got everything from Bret Bauer (SStrokerAce) but didn't buy it all at once, and I got the rocker arms used off of another guy on this board.
I got Comp Magnum pushrods for $93, Comp timing set, Beehives, locks, retainers, seats for I think $400 shipped, cam was $235ish on sale from Texas-Speed, plus the opti, etc.
Oh, and 7/16" rocker studs were $40...re-using my stock lifters. I can't remember if I bought anything else. I'll have to look in my pile when I get home.
Oh, and GM guideplates were like $25 for 8 from the local dealer. Prepare to spend about $100-125 in gaskets, fluids, RTV, loctite, etc unless you already have some of it.
Hope this helps,
I got Comp Magnum pushrods for $93, Comp timing set, Beehives, locks, retainers, seats for I think $400 shipped, cam was $235ish on sale from Texas-Speed, plus the opti, etc.
Oh, and 7/16" rocker studs were $40...re-using my stock lifters. I can't remember if I bought anything else. I'll have to look in my pile when I get home.
Oh, and GM guideplates were like $25 for 8 from the local dealer. Prepare to spend about $100-125 in gaskets, fluids, RTV, loctite, etc unless you already have some of it.
Hope this helps,
now i jut have to finish collecting parts
i will prolly do some gears but it wont be for a few months into summer time , thats y i asked if stock gears will be ok for now
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Sergio
LT1 Based Engine Tech
11
Jan 27, 2016 04:27 PM