This is a questions for all the brainiacs out there that know electrical..I put a viper car alarm in my 95 6 spd and i am having a problem by passing the clutch switch to perform remote start. there are 2 wires that go into the switch. I tested the one that was supposed to use and it reads different things when the iginition is on or off and if the cluch is engaged or now. So besides taping the switch down getto i want to do it right. Anybody help me out please. thanks guys

 

help me out here guys. thanks TTT

 

To bypass it, you simply pull the connector off and connect the two harness connector terminals together.

 

What does that do to the computer then and what are you talking about when you say terminals.. Wont the ecm in the car notice that it is unplugged. thanks