Dyno #'s with 150 shot
Thread Starter
Registered User
Joined: Sep 2003
Posts: 142
From: Glendale, AZ
Dyno #'s with 150 shot
I hit the dyno last night and did a run on motor with a 12 bolt and 4.11's and 15X11.5 MT ET's in the rear since my last dyno.
368rwhp and 358rwtq N/A
490rwhp and 515rwtq on 150 shot
The digital window switch was only on from 3K to 4.8K. Before 5K the WS shut off my kit. We were looking at the reading on the digital WS while reving the motor and noticed it was acting up around 4.8k and reading 2.5K passed that, causing it to shut off early. Who knows what hp I may see above 5K? Any ideas what could cause my ignition output to act this way?
Ramiro
368rwhp and 358rwtq N/A
490rwhp and 515rwtq on 150 shot
The digital window switch was only on from 3K to 4.8K. Before 5K the WS shut off my kit. We were looking at the reading on the digital WS while reving the motor and noticed it was acting up around 4.8k and reading 2.5K passed that, causing it to shut off early. Who knows what hp I may see above 5K? Any ideas what could cause my ignition output to act this way?
Ramiro
Thread
Thread Starter
Forum
Replies
Last Post
Formula Steve
LT1 Based Engine Tech
45
Sep 19, 2023 08:31 AM
tdigger9899
General 1967-2002 F-Body Tech
9
Sep 7, 2015 10:56 AM