Chassis dyno #s on my NA stroker.
Thread Starter
Registered User
Joined: May 2001
Posts: 545
From: Berne, Indiana, USA
Chassis dyno #s on my NA stroker.
Well last Sunday I went over to Big Shot Dyno over in Hudson. I had a great time and I was very happy with the numbers i put down. My first pull i made 432. After Bryan Herter leaned it out a little, I put down 440 HP and 424TQ. I guess i broke the Shop record for NA LT1. Thanks Lloyd, Bryan, and Brett.Ill try to post the actual video later if anyone is interested.
http://s3.photobucket.com/albums/y10...t=P5070555.jpg
http://s3.photobucket.com/albums/y10...t=P5070555.jpg
Banned
Joined: Oct 2002
Posts: 6,518
Re: Chassis dyno #s on my NA stroker.
Man those LE/BB packages don't make any power, look at that peaky TQ and HP curves and a P.O.ed customer to boot..... lol j/k
Dam nice numbers. 420ish SAE and another shop record NA LT1.
Not a problem bro, just doing my job.
Bret
Dam nice numbers. 420ish SAE and another shop record NA LT1.
Not a problem bro, just doing my job.
Bret
instead of a Power killing 3inch runner Lt1 intake.
Registered User
Joined: Aug 2002
Posts: 1,509
From: Red Oak Texas
Re: Chassis dyno #s on my NA stroker.
Good job on the #'s. Bryan did a good job on the tune.
I am sure it is alot of fun to drive.
That TQ curve is about as flat as you can ask for.
Looks like that $1650 you spent for HEADS AND CAM was well spent.
Lloyd
I am sure it is alot of fun to drive.
That TQ curve is about as flat as you can ask for.
Looks like that $1650 you spent for HEADS AND CAM was well spent.
Lloyd
Last edited by NightTrain66; May 7, 2006 at 04:30 PM.
Registered User
Joined: Feb 2003
Posts: 2,639
From: Mooresville, NC
Re: Chassis dyno #s on my NA stroker.
That cost was for HEADS AND CAM....nothing else, Dwayne. Not lifters, roller rockers, or anything else. You seem to be giving people a hard time around here lately! 
Oh yeah....nice numbers man!
Oh yeah....nice numbers man!
Thread Starter
Registered User
Joined: May 2001
Posts: 545
From: Berne, Indiana, USA
Re: Chassis dyno #s on my NA stroker.
Thanks guys. Yep Lloyd, it is a blast to drive. THanks again. CmroSS97, my exhaust is a custom ypipe welded onto the stock intermediate pipe. The pull was with a cutout just infront of the axle. I use Moblie 1 10w30. Now i need to find a way to buy a 12 bolt so I can see what this thing will do. Oh, buy the way, Lloyd "did" port my intake and apparently did a good job.
Registered User
Joined: Aug 2001
Posts: 870
From: Cuyahoga Falls, OHIO
Re: Chassis dyno #s on my NA stroker.
Good numbers man. I'm the tech from Bigshot dyno that told you you have the highest NA LT1 we've dynoed so far, a record of 412rwhp held by me for 3years with a H/C LT1. Oh well, it had to end some time. Congratulations
Edit: I could have sworn you made 444rwhp, 425rwtq. I'll check tomorrow
Edit: I could have sworn you made 444rwhp, 425rwtq. I'll check tomorrow
Last edited by Grease; May 7, 2006 at 07:51 PM.
Thread Starter
Registered User
Joined: May 2001
Posts: 545
From: Berne, Indiana, USA
Re: Chassis dyno #s on my NA stroker.
Grease,
I thought I only made 440 but hopefully im wrong. I know on one of my first 2 pulls i made 425 tq. Can you ask about that video you guys took of my last pull? They told me they would email it to me. Havent seen it yet. Let me know how your car does when you get your motor in. Sounds like its gunna be pretty mean. Might have to come back if you break my record.
I thought I only made 440 but hopefully im wrong. I know on one of my first 2 pulls i made 425 tq. Can you ask about that video you guys took of my last pull? They told me they would email it to me. Havent seen it yet. Let me know how your car does when you get your motor in. Sounds like its gunna be pretty mean. Might have to come back if you break my record.