Can I tune this to pass emissions
Thread Starter
Registered User
Joined: May 2003
Posts: 503
From: Washington, PA
Can I tune this to pass emissions
For graduation my dad bought me this long block...http://www.goautocenter.com/gen_ii_lt1.htm. It has the hot roller cam with LT4 heads. The cam specs are:
Dur@.050 Lift Lobe
Int 218 exh 228 Int .525" exh .525" 112
It is not in the car yet....I have been waiting to get this years emissions out of the way(which is this month). Next year, however will be a problem. My question is...can I tune the car with LT1 edit to pass emissions here in PA running that cam or am I screwed? If im screwed, then I guess when the time comes...Ill have to just put the stock cam back in each year. What a PITA that will be. Thanks
Dur@.050 Lift Lobe
Int 218 exh 228 Int .525" exh .525" 112
It is not in the car yet....I have been waiting to get this years emissions out of the way(which is this month). Next year, however will be a problem. My question is...can I tune the car with LT1 edit to pass emissions here in PA running that cam or am I screwed? If im screwed, then I guess when the time comes...Ill have to just put the stock cam back in each year. What a PITA that will be. Thanks
Last edited by N2OpwrdTA; Jun 2, 2003 at 11:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
armedtrigger
LT1 Based Engine Tech
10
Feb 24, 2015 08:30 PM