I was reading an article on a cam you ground for a stock headed lt1 making around 350rwhp and 350rwtq. I've been searching and pm'ing people left and right trying to find more info, so i thought i'd try you this way. I was wondering if you could pm with some more info on that cam. I'd like to get some general specs on that cam and what that cam would cost me. thanx much.

 

I thought it was 365 rwhp, or did I hear wrong

 

Yeah, he is the man. He happens to have the replica to that cam he sold to Jon A (thats the user name) in house. Why don't you just PM him instead of going about it this way? I am sure he will be glad to help, but don't expect the specs of the cam before you pay for it.

 

His PM box is full...... And I agree, you're not getting the cam specs

 

well, i only requested general specs. like lift around .520-.540 intake and .530-.550 exhaust. around 220-225 intake and 228-234 duration @.050 on the ehxaust side. something to tell me what kind of springs i would be needing, and what kind of rpm i would be running. his pm box is full, so it didn't do me any good to pm him.

 

Well, i am sure he will be online before to long and will see this post. If i talk to him tonight I will tell him to check out this thread. I hope that helps. you can also e-mail him too.

 

I don't want to bother him with emails. i don't even know his address. i figure this was an efficient way to reach him. thanx for the help guys.

 

If you talk to him tonight, would you have him take a look at this thread also- http://web.camaross.com/forums/showthread.php?t=366528

I'm having trouble contacting him through email, I think I've got his address wrong. Thanks!

 

Z,

I'll get ya!

Otherwise just e-mail me.... don't want to step on any toes.

Bret

 

Bret - if you'd like to conduct business on our site, you'll need to pay for Advertising like all our other Supporting Vendors. Please contact webmasters@camaroz28.com for Ad rates.

 

Best bet is to just get a recomendation on proper springs from who your getting the cam from, or just get the springs from them with the cam.