I've only seen it on here once that a Moroso solid drives side upper won't work with a BMR Tubular K-member. Is that a fact?

Where can I get a single drives side poly mount, or preferably a single drivers side upper solid mount?

Thanks, this is one of the last couple little things I need.

 

3 views.

 

If you look on BMRs site you can figure it out. The passenger side mount is integrated into the BMR Kmember, with poly bushings. The driver's side mount is integrated, but the bushing is on the motor side of the mount, so you could use a poly or solid mount on that side.

Summit racing sells individual motor mounts.

Ryan

 

I don't need to look on their site, I've got it sitting in my garage with the rest of my suspension swapped over.

I called Summit, they don't sell them individually, but told me to get them a part # if I found out.

Do you have a part # ?

http://paradox.shacknet.nu/dave88lx/...suspension.htm

 

I bought mine separatly about 3 years ago. If you're interested in buying the driver side mount from me I would sell it for 25 bucks (with stock clamshell). They were like 30 bucks each at the time, IIRC.

Sorry, I do not have a part number.
Ryan

 

Thanks for the offer, if I decide to go that route and can't find a solid I'll just grab it for $30 from Auto Zone. I need to glass bead and paint the motor mount anyways, so I gotta do the work. Thanks for the offer though.

For anyone interested, the Part # for Energy Suspension drivers side upper is 3.1127G