Anyone install Hal shock and springs?
#2
It is as much of a PIA as doing headers, If you have a spring compressor it should not be to bad. Taking it apart is pretty simple. The hard part is compressing the springs on the shocks with the spanner wrench. It was all worth it with the improvement in traction. You will need an alignment also. Feel free to email me with any questions.
Larry
Larry
#3
Look at the write-up and pictures on Fred/Injuneer's page.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
Carogna'sZ-28
Suspension, Chassis, and Brakes
0
02-03-2015 07:04 PM