revtime

I was cleaning up the engine bay and brushed up against the grounds right next to the red distribution block and the bottom ones moved a bit.
I thought thats odd cause I checked them first thing when I had the problem start.
Anyways turns out the bottom ones on that ground post were just a wee bit loose so I pulled the top one off and tightened up the bottom ones and the ABS inop and air bag light went out.
Just thought I would let you guys know, I was sure they were tight, so if your having this problem make sure those grounds are tight.

94formulabz

nice find. I bet your happy about that.

-brent

NeoSNK

I had the abs inop light come on. I reinserted the fuses and relay and it went away. If that abs computer ever goes bad I'm just gonna take it out. I don't like abs anyways.