Will an intake manifold from a 94+ LT1 work on a 93? More importantly can I just transport an intake manifold with fuel lines and injectors and put it on a 93 LT1?

 

whats the point? i mean it would accomplish nothing really. also you might have problems hooking up the fuel lines since on a 93 as you know they attach on the left side where on a 94+ they attach at the rear of the intake by the EGR valve.

 

My fuel lines are leaking on the rear of the manifold and I have the intake manifold leak as well. I figured you can usually score a whole used manifold cheaper than going to a dealer and buying the parts.

If the fuel lines connect differentally I'm just going to try and get a '93 one.

 

If the fuel lines are leaking its probably the fuel line connection is it not? In that case I'd spend the $45 for a new fuel line, PITA to swap but, I am guessing the plastic is at fault not an aluminum rail.

The little clips inside my connectors became bent at one time but still work, they require a bit more labor in removing them without inducing further damage, oops.

 

The connections are fine. On a '93 they're located near the front and I've looked at them and smelled them. No gas around the connections.