383 LT-4 ready for install, LTCC, Kooks, NX Direct port
12-12-2005, 11:59 PM
#1
Registered User
Thread Starter
Join Date: Jun 1999
Location: SHREVEPORT, LA, USA
Posts: 407
383 LT-4 ready for install, LTCC, Kooks, NX Direct port
Well after 2 1/2 years I think I am ready to put the motor in the car. Here are some pics before we drop the car on it tomm.
383 Lunati Lt-4
Stage 3 Futral LT-4 heads port matched LT-4 Intake with Nitro Dave NX direct kit plumbed by Allan Futral.
LTCC coil conversion kit with 10.5mm Taylor pro wires.
Kooks stepped race headers.
58mm Holley TB.
Thats the brief description
Heres some pics:
383 Lunati Lt-4
Stage 3 Futral LT-4 heads port matched LT-4 Intake with Nitro Dave NX direct kit plumbed by Allan Futral.
LTCC coil conversion kit with 10.5mm Taylor pro wires.
Kooks stepped race headers.
58mm Holley TB.
Thats the brief description
Heres some pics:
Last edited by CDE; 12-13-2005 at 12:15 AM.
Those headers look awesome! Is this a Hydraulic or Solid roller motor?
12-13-2005, 08:21 AM
#5
Registered User
Join Date: Nov 2001
Location: Louisiana, USA
Posts: 1,582
Re: 383 LT-4 ready for install, LTCC, Kooks, NX Direct port
Looks awesome, can I borrow the headers, LTCC and direct port? I don't live too far(about 3hrs. away) so it won't be too bad? LOL. My next upgrade is going to be LTCC or Delteq and I would love to have a pair of those Kooks headers. Get that thing in a car so we can see what it runs. Later Clint
12-13-2005, 05:13 PM
#12
Registered User
Join Date: May 2004
Location: Toronto, Ontario - Canada
Posts: 410
Re: 383 LT-4 ready for install, LTCC, Kooks, NX Direct port
took the words right out of my mouth. that is absolutely gorgeous.
Originally Posted by blackz97
A thing of beauty. Stuff that puppy in there already!
Steve
Steve
12-13-2005, 05:17 PM
#13
Registered User
Thread Starter
Join Date: Jun 1999
Location: SHREVEPORT, LA, USA
Posts: 407
Re: 383 LT-4 ready for install, LTCC, Kooks, NX Direct port
Wow thanks guys!!! glad yall like it, my friends seem to think Im gonna have problems keeping the front wheels on the ground, lol. We will see. So far its jetted for 200 hp. Of course I think it will handle more but I want to get it to Futral and see what they say after we get the thing tuned in and go from there. I dont want to blow it apart after building it for almost 3 years. Gotta play it safe. Still working on the Flow #'s
Stay tuned
Clint
Stay tuned
Clint
12-13-2005, 06:20 PM
#14
Registered User
Join Date: Apr 1999
Location: Chandler AZ
Posts: 753
Re: 383 LT-4 ready for install, LTCC, Kooks, NX Direct port
very nice,
I'm curious to see your flow numbers. Your set up is similar to mine. I went the LT4 route but with a Joe O Solid roller and had his shop do my heads.
Where did you buy the LTCC at?
I'm curious to see your flow numbers. Your set up is similar to mine. I went the LT4 route but with a Joe O Solid roller and had his shop do my heads.
Where did you buy the LTCC at?
