383 or 396 LT1's users
Thread Starter
Registered User
Joined: Oct 2003
Posts: 4
From: Kuwait
383 or 396 LT1's users
What's the best stroker kit for LT1 and which a good company and cheapest??
383 it's the best for street race, correct me guys if i am wrong
I need to know two things!! what's the best cam for street and without NOS you used for stroker?? and what's the high and best compression on LT1 heads S2 2.020" / 1.600" for street and without NOS??
Thanks for advance
Adnan
383 it's the best for street race, correct me guys if i am wrong
I need to know two things!! what's the best cam for street and without NOS you used for stroker?? and what's the high and best compression on LT1 heads S2 2.020" / 1.600" for street and without NOS??
Thanks for advance
Adnan
Registered User
Joined: Dec 1999
Posts: 1,697
From: Petersham, MA
www.cmotorsports.com has a nice selection of rotating assemblies at different price ranges. They also have a good selection of cams for LT1s so I would check out their site.
I've had good luck with my compression ratio at 11.3:1. I don't think I'd go too much higher than that. 10.5 to 11.5 will give you good power and still be able to run pump gas.
I've had good luck with my compression ratio at 11.3:1. I don't think I'd go too much higher than that. 10.5 to 11.5 will give you good power and still be able to run pump gas.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM