LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

*Update* Hard Starting Problems

Thread Tools
 
Search this Thread
 
Old Aug 6, 2003 | 11:29 AM
  #1  
Teal94Z's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 569
From: Southern California
*Update* Hard Starting Problems

Well after having a hard time starting the car,(Car has a new 355, hotcam kit, wires, opti, coil, fuel filter) I went and had the fuel pressure checked. At startup, it goes to normal, at idle it holds about 42 psi. Under wide open throttle it falls down to 36.5 psi! I also looked at the first 2 plugs on the passenger side, they are pretty carboned up, one was actually a little damp above where the threads start, which would explain why when I started it, it ran on 4 cylinders until I revved it above 4k rpms where they all finally fired. So I think the plugs are my starting problem, not to mention the computer is untuned. As far as the fuel pressure dropping, that would explain why it misses slightly under load. Could this be the FPR, or possibly the injectors? They are all stock with 140k on them....thanks for any further advice
Old Aug 6, 2003 | 03:42 PM
  #2  
Teal94Z's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 569
From: Southern California
Any ideas anyone?
Old Aug 6, 2003 | 07:48 PM
  #3  
veee8's Avatar
Registered User
 
Joined: Sep 2002
Posts: 94
From: Wilmington, North Carolina
Double and triple check the spark plug wire order, I had someone help from up top while I was underneath. Sure enough 6 and 8 were reversed. Ran just like that. Something to check.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Alex Barnes
LT1 Based Engine Tech
16
Jan 24, 2015 10:21 PM
HCz28
Fuel and Ignition
1
Jan 11, 2015 11:21 AM
Red97LT1
Suspension, Chassis, and Brakes
9
Dec 17, 2014 06:13 PM
jayblev95
LT1 Based Engine Tech
12
Dec 1, 2014 06:55 AM




All times are GMT -5. The time now is 11:34 AM.